![]() The format for the command is the same, but you would need to reverse the source and destination. You can also use the SCP command to copy files from your Windows machine to the Linux machine. The destination_folder is the path to the folder on your Windows machine where you want to copy the file. The format for the SCP command is: scp destination_file For example, to copy the file test.txt from the Linux machine to the Windows machine, you would use the following command: scp test.txt _machine_ip:C:\destination_folder Replace username with the username for your Windows account and windows_machine_ip with the IP address or hostname of your Windows machine. For example, if the files are in the /home/user/Documents directory, you would use the following command: cd /home/user/Documents Once you are in the correct directory, you can use the SCP command to copy the files to your Windows machine. Once you are logged in, you will need to change to the directory that contains the files you want to copy. ![]() When prompted, enter the username and password for the account you want to use. Click the Open button to connect to the Linux machine. Make sure the Connection type is set to SSH. In the PuTTY configuration window, under the Connection category, enter the port number as 22. Once you have PuTTY installed, you will need to open it and enter the hostname or IP address of the Linux machine that you want to copy files from. There are a number of SSH clients available, but we recommend using PuTTY. 1 root root 1606582 Jan 5 09:47 mycap.In order to copy files from Linux to Windows using SSH, you will need to have an SSH client installed on your Windows machine. ! we can disable the above command after copy is completedĬopy the files from Cisco router/ switch with the use of this command on local Windows/Mac/Linux: scp 10:Ĭonnection to 10.197.249.101 closed by remote host.įlash:/mycap.pcap 100% 45MB 2.9MB/s ~]# ls -l Here is the minimum configuration required on the device. With SCP enabled on the Cisco device, you can copy the file from devices without any server or application to your local PC. There is a chance the firewall blocks the ports used by any of these previously mentioned protocols between source and destination devices. Sometimes in a secure environment, it is difficult to get to a TFTP/ FTP/ SFTP/ SCP server to copy files like pcap, crash files, and Cisco IOS images from routers and switches to external sources. The process for how to copy the files from Cisco routers/switches to local Windows/ Linux/ macOS PC securely without the need for any external server or software like Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Secure File Transfer Protocol (SFTP), or Secure Copy Protocol (SCP) is described in this document. If your network is live, ensure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment. The information in this document is based on these software and hardware versions: ![]() Prerequisites RequirementsĬisco recommends that you have knowledge of Secure Shell (SSH) reachability to the device with privilege level 15 access. This document describes how to copy the files from Cisco routers and switches securely to the local Windows/ Linux/ macOS PC. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |